A septic system is an important part of all homes. Without a septic system in place, it becomes almost impossible for the residents to manage waste or survive.

So, how does a septic system get installed in a home? How does it even work?

This guide has the answers. It will walk you through the whole process of installing a septic system and explain how it actually works. First, lets start with some basic explanations of what is a septic tank.

What Is a Septic Tank?

A septic tank is like a mini sewage system for homes that is not hooked up to city sewers. This might be because the house is in a rural area or was never connected to the sewer lines. So, instead of flushing waste and water into city pipes, it goes into the septic tank.

But the septic tank isn’t just a big container for waste. That would fill up too fast! It actually has a filter system that cleans out the waste, letting clean water soak into the ground. This keeps the tank working for a long time.

Once your septic tank is in place, it is not a ‘set it and forget it ‘situation. You must schedule a pump-out every few years, typically every three to five. And be on the lookout for any signs of trouble, like strange odors or sluggish drains.

Steps to Install a Septic System

Setting up a septic system involves several steps. First, there’s a planning phase where we figure out how to install the system. After that, we actually go ahead and install it, which can take a while.

Getting Started with Planning

Before the septic system is installed there are some legal requirements in your area that you will need to sort out. Most places have special permits that provide permissions before you can build a septic tank. Sometimes, they even want to check the soil to make sure it is okay to install a septic tank. And in some areas, there are regulations about whether you are allowed to put in a septic tank at all.

Once you have figured out the legal requirements, you have got to figure out where the septic tank will go. This part is super important because you can’t just install a septic system anywhere in your yard. The area where the dirty water drains into the ground needs to be in a place where the soil has good drainage and lets water move through it easily. Otherwise, the whole system will fail to work right.

And the tank needs enough space, which might not be possible everywhere. Plus, when you are digging, you need to be careful not to mess with any pipes or cables that are already buried underground.

Soil tests can help you figure out if your soil drains well, which is super important for the part of your system that deals with draining. If you’re getting help from the professional Septic Tank Contractor Sparks NV, they’ll likely give you some advice, too.

Choosing the Right Septic Tank System

Now that you know the rules about septic systems and understand your property, it is time to choose one. Septic systems aren’t all the same. There are many types, and the best one for you depends on your situation.

The most common type is a conventional system. It has a tank where excess water goes, and then it flows into a drain field. In this field, trenches filled with gravel and sand filter the water even more. A similar option is a chamber system, which uses chambers instead of gravel and sand.

You might consider a drip distribution system if your yard isn’t big enough for a large drain field. These systems do not need much depth in the soil, but they do need some extra space near the tank for the dripping mechanism.

If your yard does not have enough depth for any of these systems, you might need a mound system. This means building a mound above the ground to hold the septic system.

There are also other types of systems, like sand filter systems, evapotranspiration systems, and community systems. However, these are less common and are usually only used in specific situations.

If you are confused about which system to choose, you can always get help from a Septic Tank Contractor Sparks NV. These professionals will help you.

The Final Installation of the system

Installing a septic tank is a multi-step process that needs some understanding of the job and the industry. It’s a good idea to hire a professional Plumbing Contractor to help you through it, as they can offer guidance and advice to make things smoother.

First, you must choose suitable sites for your septic system. Then comes the digging phase. Since everything goes underground, digging is super important.

The drain field involves making trenches for drain pipes. These trenches need to be filled with gravel and sand, which helps the water disperse and absorb into the soil. The tank needs to be buried several feet deep, which requires special machinery handled by professionals.

Now, it’s time to get the whole system set up and installed. This part usually needs experts to help out. They’ll put everything in its place, connect it all together, and then cover it back up with soil. After this step, the system is all setup and good to go!

Once the system is installed, it is important that you do not mess with it. Make sure you know where the septic system is located before starting any landscaping work. You definitely don’t want to accidentally dig into the drain field of your septic system and cause damages that will require the expenses and help from a Plumbing Repair Contractor.

Looking for professional help with your Septic Tanks Reno NV? Easy Rooter is here to help you every step of the way!

Whether you are installing a new Septic system or need Septic Pumping Sparks, Easy Rooter’s team of Septic Tank Contractor Sparks NV ensures a smooth process and top local service. With our experience and tools, your septic system will be up and running efficiently in no time.

Don’t risk DIY installation or maintenance mishaps. Trust Easy Rooter, your reliable partner for all septic system needs. Contact us today!